Skip to content
KULAINAAUTOMATION
Menu

Product

AMF panels

An AMF panel, or auto mains failure panel, watches the utility supply and starts the DG set automatically when it fails. It transfers the load to the generator, switches back when mains power returns and runs the generator's cool-down cycle, so sites such as hospitals and data centres get power back within seconds, without anyone starting the generator.

Specifications

AMF panels specifications
Sensing3-phase mains monitoring
ModesAuto / manual / test
ProtectionOver/under voltage and frequency, earth fault
AccessoriesBattery charger and emergency stop
StandardsIS 8623 / IEC 61439

Options

  • Changeover through contactors or motorised breakers, sized to the load
  • Engine fault indication and shutdown
  • Status signals for a building management system

Where it is used

  • Hospitals and nursing homes
  • Data centres and server rooms
  • Hotels, malls and residential towers with DG backup

Standards

IS 8623 · IEC 61439

The test mode matters as much as the automatic one. It lets your team run the DG set on load at a time you choose, so the first real outage is not the first time the changeover is tried.

Frequently asked questions

How quickly does an AMF panel switch to the DG set?

Most of the delay is the time the DG set takes to start and stabilise. The panel transfers the load as soon as the generator's voltage and frequency are within limits, and adjustable timers stop it reacting to brief dips.

Do I need an AMF panel or a synchronisation panel?

An AMF panel is enough for one DG set backing up the mains. If you run two or more DG sets together, or need them to share load, you need a synchronisation panel.

Discuss your panel requirement

Send your single-line diagram, BOQ or tender reference. An engineer replies within one working day.

Have drawings or a tender? Use the full enquiry form.