Skip to content
KULAINAAUTOMATION
Menu

Product

Distribution boards

A distribution board divides an incoming supply into protected circuits for lighting, power and equipment. Kulaina builds main power distribution boards and floor-wise sub-distribution boards from 4-way to 24-way, in TPN and SPN configurations, with CRCA sheet-steel enclosures, IP42 to IP55 protection and seven-tank powder coating.

Kulaina power distribution board with an incomer section and six outgoing feeder compartments

Specifications

Distribution boards specifications
Ways4-way to 24-way
ConfigurationsTPN and SPN
EnclosureCRCA sheet steel, wall mounted or floor standing
Ingress protectionIP42 / IP54 / IP55
FinishSeven-tank pretreatment and powder coating
StandardsIS 8623 / IEC 61439

Options

  • Main PDBs and floor-wise sub-distribution boards
  • High-conductivity busbars
  • Shock-proof design

Where it is used

  • Shopping malls and corporate offices
  • Factory floors and warehouses
  • Residential towers, floor by floor

Standards

IS 8623 · IEC 61439

From our shop floor

Recent Distribution boards built at our Jaipur works.

  • Power distribution board with MCCB feeders behind an inner door
  • Open distribution board showing MCCB outgoing feeders and colour-coded busbars
  • Distribution board with MCB rows, an ELCB and metering
  • Feeder pillar with switch-disconnector outgoing ways
  • Distribution panel with metering, indication and MCB outgoings
  • Distribution panel open to show MCCB incomers, contactors and wiring

The seven-tank process degreases, phosphates and rinses the steel before it is powder coated, so the finish keeps out corrosion in damp basements and dusty plant rooms instead of flaking within a few monsoons.

Frequently asked questions

What is the difference between TPN and SPN distribution boards?

A TPN board takes a three-phase and neutral supply and spreads loads across the three phases. An SPN board takes a single phase and neutral for smaller single-phase loads, such as a flat or a small office.

Which IP rating do I need?

IP42 suits clean indoor electrical rooms. Choose IP54 where there is dust or splashing water, such as plant floors and basements, and IP55 where panels may be hosed down. Panels exposed to rain also need a canopy.

Discuss your panel requirement

Send your single-line diagram, BOQ or tender reference. An engineer replies within one working day.

Have drawings or a tender? Use the full enquiry form.