Industry
Panels for solar and renewable plants
Solar plants have to collect inverter outputs, protect them from surges and connect safely to the building or the grid. Kulaina builds panels for rooftop and ground-mounted plants, from AC distribution for inverter outputs to HT panels for export, with surge protection and isolation designed in from the start.
Risks we design for
Many inverter outputs to combine
Each inverter needs its own protection before the outputs are combined. Poor sizing or labelling makes isolation unsafe when an inverter needs work.
Surges on exposed arrays
Large arrays on roofs and open ground attract lightning and switching surges. Surge protection on the DC side, in the DCDB, and on the AC side, in the ACDB, protects the inverters and the building's wiring.
The utility's connection rules
Plants that export need metering, protection and isolation that meet the electricity board's grid connection requirements.
Recommended panels
Grid connection approvals are where solar projects stall. We work from the electricity board’s requirements at the drawing stage, so the panel that arrives on site is the one the inspector expects to see.
Compliance notes
- LT panels built to IS 8623 and IEC 61439
- Surge protection on the AC side of each inverter
- Metering and protection to the electricity board's connection requirements
Frequently asked questions
What panels does a solar plant need?
At least an AC distribution box to combine and protect the inverter outputs. Plants that export at high voltage also need an HT panel with the metering and protection the electricity board specifies.
Why does a solar plant need surge protection?
Arrays are large, exposed and often on roofs, so lightning and switching surges are common. Surge protection in the DCDB and the ACDB diverts them to earth before they damage inverters or the building's wiring.
Discuss your panel requirement
Send your single-line diagram, BOQ or tender reference. An engineer replies within one working day.