Industry
Panels for real estate and commercial buildings
Malls, offices and residential towers need power split cleanly across floors and tenants, backup for lifts, pumps and fire systems, and no power factor penalties on the HT bill. Kulaina builds distribution boards, AMF and APFC panels for these buildings, designed around the building's riser layout and the developer's handover schedule.
Risks we design for
Many floors and tenants on one supply
Each floor and tenant needs its own protected, metered supply. Boards must fit the riser and electrical rooms the architect has allowed for.
Common services on backup
Lifts, water pumps, fire systems and common lighting must transfer to the DG set automatically when the supply fails.
Power factor penalties on HT connections
Buildings on HT connections are billed for poor power factor. Lifts, pumps and HVAC need correction to keep the bill down.
Recommended panels
Developers hand over buildings in phases. We label every board to the floor and riser drawings, so the facility team that takes over the building can find each circuit without the original contractor.
Compliance notes
- Panels built to IS 8623 and IEC 61439
- Floor-wise boards sized to the riser and electrical room layout
- Essential services grouped for automatic DG changeover
Frequently asked questions
What panels does a commercial building need?
Typically an LT panel after the transformer, floor-wise distribution boards for each level or tenant, an AMF panel for DG backup of common services and an APFC panel if the building has an HT connection.
Can distribution boards be delivered floor by floor?
Yes. Boards can be built and delivered in batches that match the construction schedule, so each floor's board arrives when the electrical contractor is ready for it.
Discuss your panel requirement
Send your single-line diagram, BOQ or tender reference. An engineer replies within one working day.